Smart PV Controller

SUN2000-50KTL-M0

50 kW

380 V/400 V/415 V

SUN2000-60KTL-M0

60 kW

380 V/400 V/480 V

SUN2000-65KTL-M0

65 kW

480 V

Maximum efficiency

98.70%

98.70% (380 V/400 V)

98.90% (480 V)

98.90%

European efficiency

98.50%

98.50% (380 V/400 V)

98.70% (480 V)

98.70%

Maximum input power

56,200 W

67,400 W

73,500 W

Maximum input voltage^a

1100 V

Operating voltage range^b

200–1000 V

Maximum input current (per MPPT)

22 A

Maximum short-circuit current (per MPPT)

30 A

Maximum SUN2000 backfeed current to the PV array

0 A

Minimum startup voltage

200 V

Full power MPPT voltage range

520–800 V

520–800 V (380 V/400 V), 600–850 V (480 V)

600–850 V

Rated input voltage

600 V (380 V/400 V), 620 V (415 V)

600 V (380 V/400 V), 720 V (480 V)

720 V

Number of inputs

12

Number of MPP trackers

6

Note a: The maximum input voltage is the upper threshold of the DC voltage. If the input voltage exceeds the threshold, the solar inverter may be damaged.

Note b: If the input voltage is beyond the operating voltage range, the solar inverter cannot work properly.

Rated active power

50 kW

60 kW

65 kW

Maximum apparent power

55 kVA

66 kVA

72 kVA

Maximum active power (cosφ = 1)

55 kW (Can be set to 50 kW)

66 kW (Can be set to 60 kW)

72 kW

Rated output voltage^a

220 V/380 V, 230 V/400 V, 240 V/415 V, 3W+(N)^b+PE

220 V/380 V, 230 V/400 V, 277 V/480 V, 3W+(N)^b+PE

277 V/480 V, 3W+PE

Rated output current

76 A (380 V), 72.2 A (400 V), 69.6 A (415 V)

91.2 A (380 V) 86.7 A (400 V), 72.2 A (480 V)

78.2 A

Adapted grid frequency

50 Hz/60 Hz

Maximum output current

83.6 A (380 V), 79.4 A (400 V), 76.6 A (415 V)

100 A (380 V), 95.3 A (400 V), 79.4 A (480 V)

86.7 A

Power factor

0.8 leading … 0.8 lagging

Maximum total harmonic distortion (rated power)

< 3%

Note a: The rated output voltage is determined by Grid code, which can be set on the SUN2000 app, SmartLogger, or NetEco.

Note b: Choose whether to connect the neutral wire to the SUN2000-50KTL-M0 and SUN2000-60KTL-M0 based on the application scenario. When it is used in the scenarios without neutral wires, set Output mode to Three-phase, three-wire. When it is used in the scenarios with neutral wires, set Output mode to Three-phase, four-wire.